Donec finibus, eros ut volutpat tincidunt, est neque tincidunt neque. Cras vel urna sed tellus mattis elementum sit amet at mi...
Our working hours: 7 am to 9 pm.
BX6
Key Features
• Bi-amplified design with 120 watts (70 LF, 50 HF) for powerful, accurate sound
• 6,5” Kevlar low-frequency driver with high-temp voice coil and damped rubber surround
• 1” natural silk dome tweeter delivers superb transient details
• New computer-optimized tweeter waveguide for precise imaging
• Acoustic Space Control to fine-tune low-end response to your room
• Optimized rear port for extended low-frequency response
• XLR balanced and 1/4” balanced/unbalanced inputs for connecting audio interfaces, mixers, synthesizers, DJ gear, and more
• Volume control enables you to dial in the perfect monitor playback level
• Ultra-wide range 34-20KHz frequency response covers full musical spectrum
• Front panel LED shines brightly when speaker is positioned at ideal monitor angle
Description
TYPE
2-way near-field studio reference monitors
LOW FREQ. DRIVER
6,5 inch (165mm) Kevlar curved cone with high temperature voice coil and damped rubber surround. Magnetically shielded
HIGH FREQ. DRIVER
1 inch (25mm) magnetically shielded natural silk dome
FREQUENCY RESPONSE
34 Hz – 20 kHz
CROSSOVER FREQUENCY
2.5kHz
LOW FREQ. AMPLIFIER POWER
70W
HIGH FREQ. AMPLIFIER POWER
50W
BI-AMP AMPLIFIER POWER
120W (70W+50W)
MAXIMUM PEAK SPL
117 dB SPL – Full Bandwidth Pink Noise Measured
INPUT SENSITIVITY
-10dBU
INPUT CONNECTORS
1x XLR balanced input connector 1x TRS balanced/unbalanced input connector
INPUT IMPEDANCE
10kΩ balanced, 20kΩ unbalanced
POLARITY
Positive signal at + input produce outward LF cone displacement
PROTECTION
RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external mains fuse
POWER
Voltage: 100–120V, 50/60 Hz / 220–240V, 50/60 Hz Consumption: 100W FUSE 220–240V~ T1AL 250V / 100 120V~ T1.6AL 250V
CABINET
Vinyl-laminated high-acoustic-efficiency MDF
DIMENSIONS(WIDTH X DEPTH X HEIGHT)
8.3” x 11.2” x 12.9” / 210 x 284 x 328 mm
WEIGHT
16.5 lbs, 7.5kg
Related Products
Key Features
Bi-amplified design with 130 watts (70 LF, 60 HF) for powerful, accurate sound
8” Kevlar low-frequency driver with high-temp voice coil and damped rubber surround
1.25” natural silk dome tweeter delivers superb transient details
New computer-optimized tweeter waveguide for precise imaging
Acoustic Space Control to fine-tune low-end response to your room
Optimized rear port for extended low-frequency response
XLR balanced and 1/4” balanced/unbalanced inputs for connecting audio interfaces, mixers, synthesizers, DJ gear, and more
Volume control enables you to dial in the perfect monitor playback level
Ultra-wide range 33-20KHz frequency response covers full musical spectrum
Front panel LED shines brightly when speaker is positioned at ideal monitor angle
Key Features
• Bi-amplified design with 150 watts (80 LF, 70 HF) for powerful, accurate sound
• 8” Kevlar low-frequency driver with high-temp voice coil and damped rubber surround
• 1.25” natural silk dome tweeter delivers superb transient details
• New computer-optimized tweeter waveguide for precise imaging
• Acoustic Space Control to fine-tune low-end response to your room
• Optimized rear port for extended low-frequency response
• XLR balanced and 1/4” balanced/unbalanced inputs for connecting audio interfaces, mixers, synthesizers, DJ gear, and more
• Volume control enables you to dial in the perfect monitor playback level
• Ultra-wide range 33-20KHz frequency response covers full musical spectrum
• Front panel LED shines brightly when speaker is positioned at ideal monitor angle
Key Features
- Bi-amplified design with 100 watts (60 LF, 40 HF) for powerful, accurate sound
- 5” Kevlar low-frequency driver with high-temp voice coil and damped rubber surround
- 1” natural silk dome tweeter delivers superb transient details
- New computer-optimized tweeter waveguide for precise imaging
- Acoustic Space Control to fine-tune low-end response to your room
- Optimized rear port for extended low-frequency response
- XLR balanced and 1/4” balanced/unbalanced inputs for connecting audio interfaces, mixers, synthesizers, DJ gear, and more
- Volume control enables you to dial in the perfect monitor playback level
- Ultra-wide range 35-20KHz frequency response covers full musical spectrum
- Front panel LED shines brightly when speaker is positioned at ideal monitor angle
Key Features
- Bi-amplified design with 70 watts (40 LF, 30 HF) for powerful, accurate sound
- 5” Kevlar low-frequency driver with high-temp voice coil and damped rubber surround
- 1” natural silk dome tweeter delivers superb transient details
- New computer-optimized tweeter waveguide for precise imaging
- Acoustic Space Control to fine-tune low-end response to your room
- Optimized rear port for extended low-frequency response
- XLR balanced and 1/4” balanced/unbalanced inputs for connecting audio interfaces, mixers, synthesizers, DJ gear, and more
- Volume control enables you to dial in the perfect monitor playback level
- Ultra-wide range 45-20KHz frequency response covers full musical spectrum
- Front panel LED shines brightly when speaker is positioned at ideal monitor angle
Key Features
- Bi-amplified design with 130 watts (70 LF, 60 HF) for powerful, accurate sound
- 6,5” Kevlar low-frequency driver with high-temp voice coil and damped rubber surround
- 1” natural silk dome tweeter delivers superb transient details
- New computer-optimized tweeter waveguide for precise imaging
- Acoustic Space Control to fine-tune low-end response to your room
- Optimized rear port for extended low-frequency response
- XLR balanced and 1/4” balanced/unbalanced inputs for connecting audio interfaces, mixers, synthesizers, DJ gear, and more
- Volume control enables you to dial in the perfect monitor playback level
- Ultra-wide range 34-20KHz frequency response covers full musical spectrum
- Front panel LED shines brightly when speaker is positioned at ideal monitor angle
Key Features
Bi-amplified design with 70 watts (40 LF, 30 HF) for powerful, accurate sound
5” Kevlar low-frequency driver with high-temp voice coil and damped rubber surround
1” natural silk dome tweeter delivers superb transient details
New computer-optimized tweeter waveguide for precise imaging
Acoustic Space Control to fine-tune low-end response to your room
Optimized rear port for extended low-frequency response
XLR balanced and 1/4” balanced/unbalanced inputs for connecting audio interfaces, mixers, synthesizers, DJ gear, and more
Volume control enables you to dial in the perfect monitor playback level
Ultra-wide range 45-20KHz frequency response covers full musical spectrum
Front panel LED shines brightly when speaker is positioned at ideal monitor angle
Our store info
3591 Sacramento Drive Suite 104
San Luis Obispo, CA 9340
Newsletter
[newsletter_form]
© 2018 SNSTheme. All Rights Reserved. Developed By SNSTheme
